McIntosh Bros Engineering Ltd
PO Box 4240
Palmerston North
New Zealand
McIntosh Round Bale Feeders
McIntosh
Round Bale Feeders are in a class of their own.
Bronze bushed housings
Aggression Pins
Double linkage plates
FEATURES
Feeds out either side
Covered Drive shaft
Deep cradle
Single can be self loading
Heavy angle slats mounted by M12 bolts
Direction can be changed while feeding out
Low maintenance
Four easy access grease points
Bronze bushes on drive shaft - no bearings
3” 12,000Lb zinc plated roller chain
5mm thick side panels
Two headstock catches to fully tie headstock and cradle together
1” high tensile bar drive engager (direct drive
Heavy fabricated headstock
Dual aggression pins
Heavy duty motor with 1-1/4” drive shaft
Zinc plated floor fully enclosed
8 tooth sprocket for longer life and better drive
Teeth bent for better ripping of bale
Double bottom plate for linkage pins with 3 positions
12 month warranty
Both the McIntosh Single and Double Bale Feeders feature our deep cradle design, this makes it much harder for the bale to roll out while feeding, especially on rolling country and with the added advantage when dealing with the inevitable odd shaped or squashed bales.
The cradle is lined with a steel panel to prevent fine chopped bales from falling through the mechanism. Single Bale Feeders can be self loaded by detaching the headstock, this gives access to the built in bale forks.
Aggression pins help to feed out difficult bales by digging into the ends of the bale, stopping the bale from rolling without feeding out.
put more pics in here
Locking latches
Warranty
All
equipment is guaranteed for a period of 12 months
from date of entering service, provided that such
equipment has not been subjected to improper usage
and or overloading or any other conditions contrary
to the manufacturers specifications or recommendations.
Specifications and design subject to alteration
without prior notice.
